The NO AC display is a diagnostic message telling you that the controller has stopped receiving AC power. The controller is running on the power supplied by the backup battery. Check the power source by plugging a lamp or radio into the wall outlet to verify there is power at the outlet. If your controller is not plugged into a wall outlet, the The XC Hybrid Controller delivers extensive power without the plug. Built with efficient water management features, the XC Hybrid operates DC-latching solenoids using solar energy, ambient light or battery power. XC Hybrid can also be powered with a 24VAC plug-in adapter using DC-latching solenoids. The XC Hybrid is available in 6- and 12

The Flow-Sync Sensor is a simple and economical solution for metering and reacting to actual flow conditions. A proven water saver, it monitors system flow rates and totals, and provides automatic reaction to high or low flow conditions during irrigation. The Flow-Sync is designed for use on pipe sizes up to 4".

X-Core - Installing the Wireless Solar Sync. The X-Core is compatible with the Hunter Wireless Solar Sync. Solar Sync is a sensor system that will automatically adjust the X-Core controller’s watering run times (based on changes in local climate condition) by using the Seasonal Adjust function. The Solar Sync uses a solar and temperature HC CONTROLLER WIRING DIAGRAM Water main Master valve (Optional) Water to zones Solenoid valves HC controller (12-station Wi-Fi controller) Power (24V AC transformer) Additional valves Irrigation wire (18 gauge) Common wire = Station wires = Note: Use sheathed direct burial irrigation wire. Note: Use water-proof connectors for all wire splices

Commercial Irrigation Controller Owner’s Manual and Installation Instructions IC-600PL 6-station Controller expandable to 30 stations, Plastic Cabinet IC-600M 6-station Controller expandable to 42 stations, Metal Cabinet IC-600PP 6-station Controller expandable to 42 stations, Plastic Pedestal

Owner's manuals and instruction sheets. Controller can operate two programs at the same time. Loaded with innovative features like state of the art flow monitoring, quick. Check Details. Hunter ICore 6 Station Indoor/Outdoor Plastic Controller IC600PL. Check Details. Hunter I Core No Ac Power Hunter Thermostat No Ac Power / Maybe you.

Press and hold down the , and buttons simultaneously. Press and release the RESET button on the right side of the controller. When DONE appears on the LCD, release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed. Reset procedure for the Hunter X-core controller.
ICC2. This reliable control system can run conventional, two-wire, or hybrid operations with the option to upgrade to Centralusâ„¢ cloud-based control. Number of Stations 8 to 54. Type Modular. 4 independent irrigation programs (8 start times each) Any 2 programs can operate simultaneously, providing more efficient watering.
toOxh.
  • 75pwef1plz.pages.dev/613
  • 75pwef1plz.pages.dev/193
  • 75pwef1plz.pages.dev/698
  • 75pwef1plz.pages.dev/310
  • 75pwef1plz.pages.dev/404
  • 75pwef1plz.pages.dev/172
  • 75pwef1plz.pages.dev/28
  • 75pwef1plz.pages.dev/694
  • 75pwef1plz.pages.dev/103
  • 75pwef1plz.pages.dev/451
  • 75pwef1plz.pages.dev/641
  • 75pwef1plz.pages.dev/954
  • 75pwef1plz.pages.dev/531
  • 75pwef1plz.pages.dev/478
  • 75pwef1plz.pages.dev/839

    • hunter i core controller manual